Construction
Concrete, construction materials, structural components, coatings, fire, acoustic, thermal and environmental testing.
Explore More →Test & Analysis
Independent Evidence. Reliable Results. Confident Decisions.
TEST & ANALYSIS SERVICES
Global Alliance Register provides comprehensive testing, laboratory analysis, measurement and technical evaluation services through its worldwide network of accredited laboratories and specialist testing partners.
From a single material sample to complex multidisciplinary testing programs, GAR gives clients access to extensive testing capability through one coordinated international service interface.
We support manufacturers, asset owners, operators, engineering companies, contractors, suppliers, retailers, project developers and other organizations requiring independent technical evidence for compliance, product safety, quality, performance, qualification, failure investigation, environmental compliance, certification and market access.
One Global Interface. Worldwide Testing Capability.
Instead of requiring clients to identify, qualify and coordinate multiple laboratories, GAR manages testing around the actual technical requirement — including standard selection, laboratory selection, sampling, test planning, progress follow-up, technical review and reporting.
Where accredited testing is required, testing is coordinated through laboratories whose applicable accreditation scope covers the required test method or standard.
01
Materials & Industrial Testing
Materials, NDT, corrosion, failure analysis and full-scale testing
→
02
Environmental & Workplace Testing
Air, emissions, noise, vibration, water, soil and occupational measurements
→
03
Product & Consumer Goods
Softlines, hardlines, electrical, electronics and industrial products
→
04
Performance & Fitness for Use
Durability, environmental simulation, acoustics and performance validation
→
05
Sector-Specific Testing Solutions
Industry-focused programs for energy, marine, automotive, construction and more
→
06
Certification & Market Access
Testing for certification, homologation, type approval and regulatory access
→
01 — MATERIALS & INDUSTRIAL TESTING
↑ Back to Service Index
Understand the Material. Verify the Component. Protect the Asset.
GAR coordinates destructive, analytical and non-destructive testing for materials, components and industrial systems used across energy, oil and gas, marine, manufacturing, construction and other asset-intensive sectors.
Materials Testing & Characterization
Tensile, compression, bend, impact, hardness, fatigue, fracture toughness, creep, shear, adhesion, wear, abrasion and other mechanical-property testing.
Metallurgical & Microstructural Analysis
Metallography, macro and micro examination, grain size, weld examination, heat-treatment assessment, inclusion analysis and material degradation evaluation.
Chemical & Material Analysis
Chemical composition, elemental analysis, PMI, alloy verification, trace elements, impurities, contamination and material identification.
Corrosion & Sour-Service Testing
Salt spray, cyclic corrosion, pitting, crevice corrosion, galvanic corrosion, stress-corrosion cracking, H₂S / sour-service testing, hydrogen exposure and MIC.
Coatings & Surface Testing
Coating thickness, adhesion, holiday detection, porosity, abrasion, impact resistance, chemical resistance, weathering and coating-system qualification.
NDT & Advanced NDT
VT, PT, MT, UT, RT, ET, PAUT, TOFD, thickness measurement, leak testing, PMI and specialist inspection techniques.
Failure Analysis & Root-Cause Investigation
Multidisciplinary investigation combining visual examination, NDT, metallography, fractography, chemical analysis, mechanical testing, operating-condition review and engineering interpretation.
Full-Scale & Specialized Engineering Testing
Full-scale components, pipes, pressure systems, structural assemblies, flow testing, load testing, fatigue, pressure/burst testing and custom test rigs.
Custom Industrial Test Programs
Client-specific qualification and validation programs combining multiple laboratory disciplines, test methods and technical acceptance criteria.
02 — ENVIRONMENTAL, POLLUTION & WORKPLACE TESTING
↑ Back to Service Index
Measure Environmental Impact. Protect People. Demonstrate Compliance.
GAR coordinates laboratory analysis and on-site environmental measurements for industrial facilities, infrastructure, construction projects, workplaces and operating assets.
Ambient Air Quality
PM10, PM2.5, suspended particulates, dust deposition, NOx, NO₂, SO₂, CO, ozone, VOCs, heavy metals, PAHs and other project-specific pollutants.
Industrial & Stack Emissions
Particulates, combustion gases, VOCs, metals, process emissions, stack sampling, emission monitoring and performance measurements.
Environmental Noise
Industrial noise, boundary noise, community noise, construction noise, transportation noise, occupational noise, noise-source identification and compliance measurement.
Vibration Measurement
Machinery vibration, building vibration, ground-borne vibration, construction vibration, hand-arm vibration and whole-body vibration.
Workplace / Occupational Measurements
Noise, vibration, dust, chemical exposure, airborne contaminants, thermal conditions and other applicable occupational measurements.
Water & Wastewater Analysis
Drinking water, process water, boiler water, cooling water, groundwater, wastewater, surface water and seawater analysis.
Soil, Sludge & Sediment
Hydrocarbons, heavy metals, organic contaminants, chemical pollutants, soil characterization and sediment analysis.
Microbiological Testing
Total microbial counts, bacterial contamination, pathogens, Legionella, water microbiology and industrial microbiology.
Indoor Air Quality & Product Emissions
VOC emissions, formaldehyde, particulates, material emissions, indoor pollutants, building-product emissions, furniture emissions and odour evaluation.
03 — PRODUCT SAFETY & CONSUMER GOODS TESTING
↑ Back to Service Index
Safe. Compliant. Reliable. Fit for Purpose.
GAR coordinates product testing across Softlines, Hardlines, electrical/electronic and commercial/industrial product categories.
SOFTLINES
Textiles, Apparel, Footwear & Fashion Products
Fiber composition, color fastness, dimensional stability, shrinkage, tensile and tear strength, abrasion, pilling, seam performance, flammability, slip resistance, material performance and durability.
- Textiles & Apparel
- Footwear & Leather
- Toys & Children’s Products
- Jewelry & Fashion Accessories
- Chemical Safety & Restricted Substances
HARDLINES
Household, Furniture, Tools & Consumer Products
Mechanical safety, strength, stability, durability, chemical safety, performance, ergonomics and intended-use testing.
- Furniture
- Household Goods
- Kitchenware & Cookware
- Tools & Garden Products
- Sports & Leisure Products
- Mechanical Consumer Products
ELECTRICAL & ELECTRONIC
Electrical Safety, EMC, RF & Connectivity
Electrical safety, insulation, dielectric strength, leakage current, temperature rise, ground continuity, components, EMC, RF, wireless, Bluetooth, Wi-Fi and connectivity testing.
COMMERCIAL & INDUSTRIAL
Machinery & Industrial Product Testing
Machinery, pumps, compressors, valves, industrial controls, lifting equipment, material-handling equipment, workshop equipment, industrial electronics and machine tools.
Testing can combine mechanical safety, electrical safety, functional performance, EMC, environmental resistance and regulatory compliance.
Restricted Substances & Chemical Compliance
REACH-related testing, RoHS-related testing, heavy metals, phthalates, PAHs, SVHCs, formaldehyde, azo dyes and other applicable restricted substances.
Fire, Flammability & Thermal Testing
Reaction to fire, fire resistance, flammability, flame spread, smoke generation, heat release, ignition characteristics, thermal performance and sector-specific fire testing.
Product Safety & Regulatory Testing
Coordinated testing against applicable safety standards, product regulations and market-access requirements.
04 — PERFORMANCE, RELIABILITY & FITNESS FOR USE
↑ Back to Service Index
Compliance Tells You It Meets Requirements. Performance Tells You It Works.
GAR coordinates testing that goes beyond basic compliance to evaluate whether a product, component or system performs reliably for its intended application.
Fitness for Use
Functional performance, intended-use verification, usability, ergonomics, repeated-use performance, endurance and reliability.
Durability & Lifecycle Testing
Wear, fatigue, cycling, repeated operation, accelerated aging, mechanical endurance and long-term performance.
Environmental Simulation
Temperature, heat, cold, humidity, thermal cycling, thermal shock, UV, weathering, salt fog, dust, water, harmful gases, mechanical shock and vibration.
Ingress Protection
Dust and water ingress testing against applicable IP classifications and product requirements.
Transport & Packaging Simulation
Drop, impact, vibration, compression, climatic conditioning, transportation simulation and packaging performance.
Acoustic Performance
Sound power, sound pressure, machinery noise, appliance noise, equipment noise, product acoustic performance and sound quality.
Building & Architectural Acoustics
Sound insulation, sound absorption, reverberation, room acoustics, façade performance and building acoustic performance.
Product Claims Verification
Independent testing of measurable performance claims made by manufacturers, suppliers and product owners.
Benchmark & Comparative Testing
Comparative performance testing to evaluate competing products, technologies or design alternatives against defined criteria.
05 — SECTOR-SPECIFIC LABORATORY & TESTING SOLUTIONS
↑ Back to Service Index
Specialist Testing for Specialist Industries.
Oil & Gas / Petrochemical
Materials, metallurgy, welding, NDT, sour service, H₂S, corrosion, coatings, pipes, valves, pressure equipment, failure analysis and petroleum products.
Power & Utilities
Materials, turbine and generator components, electrical equipment, transformers, cables, corrosion, water chemistry, failure analysis and emissions.
Marine
Marine materials, welding, NDT, coatings, corrosion, fuels, lubricants, electrical equipment, fire performance and marine products.
Construction & Infrastructure
Concrete, cement, aggregates, steel, soil, rock, geotechnical, building products, façades, fire, acoustic, thermal and environmental testing.
Automotive & Mobility
Materials, components, EMC, electrical/electronics, environmental simulation, vibration, durability, corrosion, interiors, flammability, batteries and EV components.
Manufacturing
Raw materials, components, product performance, failure analysis, supplier qualification, chemical analysis, durability and quality verification.
Energy & Renewables
Solar/PV, wind components, batteries, energy storage, cables, electrical equipment, hydrogen technologies and alternative-energy systems.
Petroleum, Fuels & Lubricants
Crude oil, gasoline, diesel, marine fuels, aviation fuels, biofuels, lubricants, hydraulic oils and transformer oils.
Food & Agriculture
Chemical, microbiological, contaminants, residues, composition, water, packaging and food-contact-material testing.
Transportation & Logistics
Packaging, transport simulation, fuels, materials, components, environmental durability and safety performance.
Aeronautics & Space
Advanced materials, fatigue, fracture, NDT, coatings, environmental simulation, components and qualification testing.
Telecommunications
Electrical safety, EMC, RF, wireless, connectivity, environmental durability and performance.
06 — CERTIFICATION, QUALIFICATION & GLOBAL MARKET ACCESS
↑ Back to Service Index
Test Once for the Right Purpose.
Testing is frequently one stage of a wider conformity-assessment, certification, homologation or market-access process. GAR coordinates test programs around the intended regulatory or commercial outcome.
Product Certification Testing
Testing against applicable product standards and certification requirements.
European Market Requirements
Testing supporting applicable conformity-assessment routes, technical documentation and CE-related requirements.
UK & Other National Markets
Testing aligned with applicable national regulatory and product-compliance requirements.
Homologation & Type Approval
Automotive, marine, transportation, industrial and other sector-specific approval programs.
Procurement & Supplier Qualification
Testing against purchaser specifications, project standards and supplier-approval requirements.
International Trade Testing
Product specification, safety, quality and destination-market requirements for cross-border trade.
R&D & Pre-Certification Testing
Early-stage testing to identify compliance or performance issues before formal certification testing.
Prototype & Product Development
Proof of concept, prototype testing, benchmarking, design verification, validation and qualification.
Regulatory Gap Testing
Targeted testing to close identified technical or compliance gaps before certification, approval or market entry.
SUPPORTING CAPABILITY
Calibration, Metrology & Measurement
Reliable testing depends on reliable measurement. GAR coordinates calibration and metrology services through appropriately competent laboratories, matching the required measurement discipline, range, uncertainty and accreditation scope to the client’s technical requirement.
01
Dimensional & Geometrical
Length, diameter, thickness, angle, form, surface and dimensional measuring equipment.
02
Pressure & Vacuum
Pressure gauges, transmitters, calibrators, vacuum instruments and pressure-measurement systems.
03
Temperature & Humidity
Thermometers, thermocouples, RTDs, chambers, humidity instruments and environmental measuring devices.
04
Electrical & Electronic
Voltage, current, resistance, frequency, power and other electrical measurement parameters.
05
Mass, Force & Torque
Balances, weights, load cells, force instruments, torque tools and mechanical measuring systems.
06
Flow & Volume
Flow meters, volumetric devices and measurement systems used for liquids and gases.
07
Time & Frequency
Timers, frequency devices and other instruments requiring time- or frequency-based calibration.
08
Measurement System Support
Calibration planning, equipment status review, traceability requirements, interval review and coordination of accredited calibration where required.
Accredited calibration where required
Services are coordinated according to the laboratory’s applicable accreditation scope and the measurement range, uncertainty and traceability requirements of the task.
THE GAR WORLDWIDE LABORATORY NETWORK
The Right Laboratory for the Right Test
GAR’s strength is not limited to the capability of one laboratory or one country. Testing programs can be assigned according to technical need, accreditation, industry recognition, geography and project requirements.
Test Method
Selection according to the required technical capability and acceptance criteria.
Applicable Standard
ISO, EN, ASTM, IEC, API, ASME or other applicable international, national, sector or client specification.
Accreditation Scope
Where accreditation is required, the laboratory’s applicable scope must cover the relevant method or activity.
Industry Recognition
Some programs require laboratories recognized by regulators, Certification Bodies, Classification Societies or scheme owners.
Geographical Location
Laboratory selection can consider sample logistics, project location, regulatory acceptance, schedule and cost.
Technical Specialization
Highly specialized testing can be assigned to facilities possessing the appropriate equipment and subject-matter expertise.
From One Sample to an International Testing Program
01
Requirement
02
GAR Technical
Review
Review
03
Test / Standard
Selection
Selection
04
Laboratory
Selection
Selection
05
Sampling
06
Testing &
Analysis
Analysis
07
Technical
Review
Review
08
Reporting &
Action
Action
FROM EVIDENCE TO ACTION
More Than a Test Report
A laboratory result may identify a problem, confirm a condition or reveal a compliance gap. GAR can help coordinate the technical, engineering and conformity-assessment actions that follow.
01
Material Failure
Determine why a component or material failed and what should happen next.
Testing
→
Failure Analysis
→
Engineering Review
→
Corrective Action
→
Re-Test
02
Product Compliance
Move from a failed or incomplete result toward compliant product evidence.
Testing
→
Gap Identification
→
Corrective Action
→
Re-Test
→
Certification
03
Industrial Equipment
Translate inspection or test findings into an engineering and acceptance pathway.
NDT / Testing
→
Engineering Assessment
→
Repair
→
Inspection
→
Acceptance
04
Environmental Compliance
Use measurement data to guide corrective action and demonstrate improved compliance.
Measurement
→
Assessment
→
Corrective Action
→
Re-Measurement
→
Verification
05
International Market Access
Coordinate the testing evidence required to support certification, approval and entry into the intended market.
Regulatory Review
→
Testing
→
Technical Documentation
→
Certification / Approval
→
Market Access
INDUSTRIES WE SUPPORT
Testing Capability Across GAR’s Market Sectors
Power & Utilities
Materials, electrical systems, power equipment, cables, corrosion, water chemistry, emissions and failure analysis.
Explore More →Oil & Gas
Metallurgy, sour-service testing, corrosion, NDT, coatings, fuels, piping, pressure equipment and failure investigation.
Explore More →Manufacturing
Materials, products, components, supplier qualification, chemical analysis, durability and quality validation.
Explore More →Marine
Marine materials, fuels, coatings, corrosion, equipment, electrical products, fire performance and statutory-support testing.
Explore More →Automotive
Components, materials, EMC, electrical systems, batteries, environmental simulation, durability and homologation support.
Explore More →Agriculture & Food
Food, water, chemical, microbiological, packaging and contaminant testing.
Explore More →Retailers
Consumer-product safety, chemical compliance, durability, restricted substances and supplier-quality testing.
Explore More →Tourism & Hospitality
Water, environmental, microbiological, food-safety and facility-related testing.
Explore More →Healthcare & Pharmacy
Materials, products, environmental, chemical and specialized compliance testing.
Explore More →Transportation & Logistics
Materials, packaging, equipment, fuels, environmental durability and safety testing.
Explore More →Aeronautics & Space
Advanced materials, fatigue, environmental simulation, NDT, coatings and component qualification.
Explore More →Telecommunication
Electrical safety, EMC, RF, wireless, environmental durability and product-compliance testing.
Explore More →International Trade
Pre-shipment, specification, product, chemical, safety and destination-market compliance testing.
Explore More →Governments & Public Sector
Regulatory, infrastructure, product, environmental and public-procurement testing programs.
Explore More →Finance
Independent technical testing supporting due diligence, investment decisions and asset assessment.
Explore More →Insurance
Failure investigation, forensic analysis, damage assessment and independent laboratory evidence.
Explore More →Why Global Alliance Register?
Worldwide Laboratory Network
Access to specialist testing capabilities across multiple countries and technical disciplines.
One Global Interface
GAR coordinates laboratories, methods, documentation and technical communication for the client.
Accredited Capability
Where accreditation is required, laboratories are selected according to the applicable method and accreditation scope.
Cross-Industry Expertise
From consumer products and environmental measurements to advanced industrial materials and failure investigations.
Integrated TIC Solutions
Testing can connect with inspection, engineering, auditing, certification and market-access requirements.
Global Alliance Register
Need Support with Test & Analysis?
Engage Global Alliance Register for independent expertise, technical assurance and practical support tailored to your Test & Analysis needs.
Discuss Your Test & Analysis Needs