Global Alliance Register
GAR TIC Red Bulletin
The November 2026 edition reviews the regulatory, standards, market-access and conformity-assessment developments that mattered during October.
Executive brief
October’s central theme: evidence must keep pace with regulation
October brought a new harmonised AI quality-management standard, a major machinery-safety update in Türkiye, revised pressure-equipment standards, new CBAM accreditation capacity and important developments in organic trade, medical-device performance evidence and LNG regulation.
Reporting basis: This bulletin covers developments announced, adopted, published or entering application between 1 and 31 October 2026. Later dates are included as preparation or transition milestones. Proposals and draft guidance are identified as non-binding; publication of a standard or guidance is not treated as a new legal requirement unless the relevant instrument says so.
First harmonised AI QMS standard reaches the Official Journal
EN 18286:2026 gives providers of high-risk AI systems a route to demonstrate the Article 17 quality-management requirements it covers.
Türkiye publishes its new machinery-safety regulation
The new framework follows EU Regulation 2023/1230 and addresses machinery, related products, software-related safety and substantial modifications.
Pressure-equipment harmonised references are updated
The PED standards list now includes updated references for refrigeration, heat pumps, LPG equipment, cryogenic vessels and welding-related standards.
CBAM verification capacity expands
Swedac accredited its first Swedish CBAM verifier on 13 October; a 27 October agreement with UKAS creates a route for UK bodies to be assessed for specified EU schemes.
EU organic rules move to a final compromise text
The Council’s Special Committee on Agriculture confirmed a compromise text on 26 October and sent an offer letter to Parliament on 28 October. Existing rules remain in force until adoption.
AI Act and EUDR dates are approaching
2 December brings AI Act obligations for certain legacy systems and new prohibited practices; 30 December is the EUDR application date for large and medium operators.
RED ALERT
Five dates and obligations that need immediate attention
These are current or imminent requirements, not all October rule changes. Check applicability against the product, organization, market and role in the supply chain.
TÜRKAK’s new ISO/IEC 17020 applications move to the 2026 edition
From 1 November 2026, new inspection-body accreditation applications to TÜRKAK are to be made against ISO/IEC 17020:2026. The transition policy moves routine surveillance and renewal assessments to the 2026 edition from 1 August 2027 and sets 27 March 2029 as the end of the transition period.
Who is affected: inspection bodies and organizations that rely on accredited inspection reports for statutory, contractual, safety or quality decisions.
Customer action: this date does not automatically invalidate existing accreditations or reports. When appointing an inspection body, check its current accreditation status, scope, relevant inspection activities and transition arrangements rather than relying only on an old certificate copy.
Primary source: TÜRKAK — ISO/IEC 17020:2026 transition policy.
AI Act legacy-content marking and new prohibited practices take effect
Under the AI Act as amended by Regulation (EU) 2026/1744, providers of AI systems that generate synthetic audio, image, video or text and were placed on the market before 2 August 2026 must take the necessary steps to comply with Article 50(2) by 2 December 2026. The provision concerns marking and machine-readable detectability of artificially generated or manipulated content.
From the same date, the Act’s additional prohibitions concerning AI systems used to generate or manipulate realistic non-consensual intimate material and child sexual-abuse material apply, within the defined scope and safeguards in Article 5.
Who is affected: providers and deployers of generative AI systems, platforms integrating such systems, and organizations publishing AI-generated content.
Customer action: inventory systems placed on the market before 2 August; confirm marking, metadata or other machine-readable detection measures; test controls against foreseeable misuse; document consent, safeguards and escalation processes. Systems placed on the market after 2 August are already subject to the applicable transparency obligations.
Primary source: Regulation (EU) 2026/1744 — Digital Omnibus on AI · AI Act, consolidated text.
EUDR application begins for large and medium operators
The EU Deforestation Regulation applies from 30 December 2026 to large and medium operators. Micro and small operators generally follow on 30 June 2027, but micro and small operators already covered by the EU Timber Regulation have the 30 December 2026 date.
The rules cover cattle, cocoa, coffee, oil palm, rubber, soya and wood, together with listed derived products. Operators and traders must be able to demonstrate that relevant products are deforestation-free and legally produced, supported by due-diligence information and geolocation data.
Who is affected: importers, exporters, manufacturers, processors, traders and downstream buyers dealing in covered commodities or listed products.
Customer action: classify products against Annex I; map suppliers and production plots; collect geolocation and legality evidence; test traceability from origin to shipment; and ensure due-diligence statements can be supported by records. Products added by Delegated Regulation (EU) 2026/2102, including soluble coffee and certain palm-oil derivatives, become subject only from 30 December 2027.
Primary source: European Commission — EUDR implementation and dates.
Existing third-country organic equivalence recognition reaches a year-end milestone
Under the current Article 48 framework of Regulation (EU) 2018/848, recognition of certain third countries as equivalent is scheduled to end on 31 December 2026. The Council’s compromise text on amendments to production, labelling, certification and third-country trade was sent to the European Parliament on 28 October, but it has not yet become law.
Who is affected: importers and exporters of organic products, producers, control bodies and retailers relying on third-country equivalence arrangements.
Customer action: verify the current legal recognition route for the country, product category and control body. Do not treat the Council compromise text as an extension until the amending act is formally adopted and published in the Official Journal.
Primary sources: Council of the EU — Special Committee on Agriculture, 26 October 2026 · Regulation (EU) 2018/848.
CRA vulnerability and severe-incident reporting remains an active obligation
ENISA refreshed its Single Reporting Platform FAQs on 15 October. The statutory reporting clocks remain unchanged: early warning within 24 hours of awareness; notification within 72 hours; and a final report no later than 14 days after a corrective or mitigating measure becomes available for an actively exploited vulnerability, or within one month after the 72-hour notification for a severe incident.
The October FAQ update adds practical guidance on matters including mistaken submissions and ENISA follow-up where a notified vulnerability may be included in the European Vulnerability Database.
Who is affected: manufacturers of products with digital elements within the CRA scope. The reporting obligation applies to covered products already placed on the EU market, not only new products introduced after December 2027.
Customer action: maintain an incident-response process that connects product security, engineering, legal and regulatory teams; identify the responsible EU CSIRT; and rehearse the reporting workflow.
Primary source: ENISA — CRA Single Reporting Platform FAQs, updated 15 October 2026.
Standards & Regulatory Watch
October’s principal changes and their practical implications
Each item below distinguishes an adopted or published instrument from a proposal or draft that does not yet create a new binding requirement.
European Commission proposes a new Standardisation Regulation
What changed: the Commission published COM(2026)780, proposing to repeal and replace Regulation (EU) No 1025/2012. The proposal is intended to make European standardisation more responsive to emerging technologies and legislative deadlines. It would allow targeted use of designated alternative standards-development organisations where the European standardisation organisations cannot deliver to the required timing or quality, provide free and unrestricted access to standards referenced in EU legislation, strengthen participation and improve coordination in international standardisation.
Why it matters: harmonised standards are a key route for demonstrating conformity with EU product legislation. Faster or alternative routes could affect the timing and availability of standards supporting AI, cybersecurity, green technologies and industrial products.
Who is affected: manufacturers and importers of regulated products, standards users, industry associations, SMEs and conformity-assessment bodies.
Status and action: this is a legislative proposal, not an adopted regulation. Continue using the standards currently cited in the Official Journal for the applicable product legislation. Monitor the legislative process and participate in relevant technical-committee consultations where standards affect product design or market access.
Primary source: European Commission — COM(2026)780, Proposal for a Regulation on European standardisation, 6 October 2026.
Pressure Equipment Directive standards list is revised
What changed: Commission Implementing Decision (EU) 2026/2211 updates the harmonised standards cited under the Pressure Equipment Directive. The references include standards relevant to refrigeration systems and heat pumps, LPG equipment, cryogenic vessels, pressure equipment and welding or brazing activities. Superseded references are scheduled for withdrawal on 2 April 2028. The Official Journal listing also contains a restriction affecting the presumption of conformity for a listed boiler standard; manufacturers should check the annex rather than assume that every clause is covered.
Why it matters: the cited edition of a harmonised standard can determine whether a manufacturer benefits from a presumption of conformity for the essential safety requirements it covers. Using an obsolete edition or overlooking a restriction can leave gaps in the technical file.
Who is affected: manufacturers of pressure equipment and assemblies, heat pumps, refrigeration systems, LPG equipment, cryogenic vessels, shell boilers and welded pressure parts; fabricators, EPC contractors, notified bodies and inspection organisations.
Practical action: update the standards register and PED compliance matrix; review design calculations, materials traceability, welding procedure and personnel qualifications, NDT plans, pressure testing and technical documentation. Plan the transition away from withdrawn references before April 2028.
Primary source: Commission Implementing Decision (EU) 2026/2211.
EN 18286:2026 becomes the first harmonised AI quality-management standard
What changed: the reference to EN 18286:2026, “Artificial intelligence — Quality management system for EU AI Act regulatory purposes”, was published in the Official Journal through Commission Implementing Decision (EU) 2026/2274. Providers implementing the standard benefit from a presumption of conformity with the Article 17 AI Act quality-management requirements covered by it.
Why it matters: the standard converts Article 17 into an operational QMS framework built around the AI-system lifecycle. It is designed to be layered onto an existing system such as ISO/IEC 42001, ISO 9001 or ISO 13485; it does not replace those systems and does not demonstrate compliance with every AI Act obligation.
Who is affected: providers of high-risk AI systems, including developers and manufacturers in healthcare, industrial automation, transport, energy, finance and other regulated sectors.
Practical action: map Article 17 requirements against current governance and QMS processes; document risk management, data governance, design and development controls, testing, validation, post-market monitoring, corrective action and change management. The amended AI Act schedules high-risk Annex III requirements from 2 December 2027 and Annex I product-related high-risk requirements from 2 August 2028.
Primary source: European Commission — EN 18286:2026 published in the Official Journal, 19 October 2026.
Türkiye publishes the Machinery Safety Regulation (2023/1230/AB)
What changed: the new Turkish regulation is based on EU Regulation (EU) 2023/1230 and replaces the previous 2006/42/EC-based machinery framework. Certain administrative and notified-body provisions took effect on publication; most product-design, manufacturer, conformity-assessment and market-placement provisions apply from 20 January 2027.
The framework covers machinery, related products and partly completed machinery. It gives greater prominence to safety-related software and protection against corruption, digital instructions and substantial modifications that may cause the modifier to assume manufacturer responsibilities.
Why it matters: machinery compliance will increasingly depend on software configuration, cybersecurity-related risk controls, change history and the quality of digital technical documentation, not only mechanical guarding and electrical safety.
Who is affected: machinery manufacturers, importers, distributors, integrators, plant owners, contractors and organizations modifying machinery already in service.
Practical action: identify products that will be first placed on the market from 20 January 2027; review risk assessments, safety-related control systems, software updates, technical files, declarations, instructions and modification procedures. Products already placed on the market under the former rules before the application date are subject to the regulation’s transitional provisions.
Primary sources: Resmî Gazete — Makine Emniyeti Yönetmeliği (2023/1230/AB), 16 October 2026 · EU Regulation (EU) 2023/1230.
CBAM verifier accreditation and cross-border assessment routes expand
What changed: on 13 October, Swedac accredited the first Swedish verification body for CBAM emissions verification. On 27 October, Swedac and UKAS signed an agreement under which UKAS can assess UK-based verification and certification bodies on Swedac’s behalf; Swedac retains the final accreditation decision. The initial cooperation covers CBAM and RED III.
Why it matters: when importers use actual embedded-emissions values under CBAM, the installation emissions reports must be verified by an appropriately accredited verifier. Accreditation must cover the activity groups relevant to the assignment. The UKAS–Swedac arrangement is a targeted assessment route, not a blanket mutual-recognition agreement for all UK certificates or services.
Who is affected: EU CBAM importers, non-EU producers of covered goods, emissions-data teams, verification bodies and UK organisations seeking accreditation for the specified EU schemes.
Practical action: establish a reliable installation-level data trail for fuel and electricity use, production volumes, process emissions, allocation methods and source records. Confirm the verifier’s accreditation scope before contracting and ensure the evidence period and methodology match the applicable CBAM rules.
Primary sources: Swedac — First Swedish CBAM verification body accredited, 13 October 2026 · Swedac — UKAS cooperation agreement, 27 October 2026.
Organic regulation amendment advances to the European Parliament
What changed: the Council’s Special Committee on Agriculture confirmed the final compromise text on 26 October. An offer letter and text were sent to the Chair of the European Parliament’s Agriculture and Rural Development Committee on 28 October. The proposed amendment concerns production, labelling, certification and certain rules on trade with third countries.
Why it matters: the change is relevant to organic operators using third-country equivalence arrangements, but the Council’s compromise is not itself binding legislation. Under the current Article 48 framework, certain third-country equivalence recognitions have a 31 December 2026 sunset.
Who is affected: organic producers, importers, exporters, processors, control bodies and retailers.
Practical action: check the legal recognition route for each country, product category and control body; monitor formal adoption and Official Journal publication before relying on any proposed extension for 2027 shipments.
Primary sources: Council of the EU — SCA, 26 October 2026 · Regulation (EU) 2018/848.
Trending TIC Services
Where demand for independent technical evidence is increasing
The October developments point to a growing need for documented, technically defensible evidence across the product and asset lifecycle.
AI quality and conformity readiness
AI QMS gap assessments, lifecycle risk controls, data-governance reviews, validation evidence, model-change control, post-market monitoring and transparency measures aligned with the AI Act and EN 18286.
Product cybersecurity and CRA reporting readiness
Product-scope reviews, vulnerability-management processes, software and firmware testing, secure-development evidence, incident-response exercises and technical documentation supporting 24/72-hour reporting.
CBAM and greenhouse-gas data assurance
Installation-level emissions-data reviews, calculation-method checks, energy and production-data reconciliation, source-record traceability and preparation for verification by an appropriately accredited body.
Machinery and pressure-equipment assurance
Design and technical-file reviews, machinery risk assessment, supplier surveillance, material verification, welding inspection, NDT, pressure testing, FAT/SAT and commissioning inspection.
Supply-chain traceability and responsible sourcing
EUDR commodity mapping, geolocation evidence, chain-of-custody checks, supplier audits, organic control-document reviews and verification of product-origin records.
Medical-device and drug-delivery performance evidence
Device performance characterisation, software validation, combination-product evidence, design verification, reliability testing and post-market change assessment.
Marine dangerous-goods compliance
Dangerous-goods classification, packaging and marking checks, segregation and stowage reviews, container-packing assessments, documentation verification and staff training.
Sector-specific developments
Where October’s changes have the clearest operational impact
United States proposes to modernise LNG facility requirements
On 28 October, PHMSA released a prepublication notice of proposed rulemaking proposing updates to 49 CFR Part 193, including incorporation of NFPA 59A-2026. The proposal addresses LNG facility design, siting, construction, operation and maintenance, including risk-based approaches and updated treatment of newer facility configurations.
Status: proposed rule only; it does not change current legal requirements. The proposal indicates a 60-day comment period after Federal Register publication. The official closing date should be confirmed once the notice is formally published.
- LNG terminal owners and developers should compare the proposal with the current design and safety basis.
- EPC contractors and equipment suppliers should identify potential effects on siting studies, risk assessments, inspection plans, emergency response and operating procedures.
- Operators and technical stakeholders should review the docket and consider whether technical comments are warranted.
Primary source: PHMSA — Proposed amendments for LNG facilities, 28 October 2026.
FDA clarifies software outputs and drug-delivery performance evidence
FDA published the final guidance “Regulatory Considerations for Prescription Drug Use-Related Software” in October. It explains how FDA applies drug-labelling authorities to certain software outputs disseminated by or on behalf of a drug sponsor for use with prescription drugs or specified drug-device combination products. The guidance finalises a 2023 draft and is non-binding agency guidance.
FDA also issued draft guidance on “Essential Drug Delivery Performance Characteristics for Devices Intended to Deliver Drugs and Biological Products”. It describes recommended performance information and data for investigational, marketing and post-market change applications. Comments are due by 28 January 2027; the draft is not for implementation.
- Drug sponsors and software providers should assess whether software outputs fall within the final guidance and how those outputs are controlled and supported by evidence.
- Manufacturers of injectors, pumps, inhalers and other drug-delivery devices should review performance-characterisation plans and the evidence available for design changes.
- Combination-product teams should align device performance, drug delivery, software validation and post-market change records.
Primary sources: FDA — Final prescription drug use-related software guidance, October 2026 · FDA — Draft drug-delivery performance guidance, October 2026.
IMO publishes the 2026 STCW and IMDG reference editions
The IMO’s “Just Published” register records the STCW Convention and Code, 2026 Edition on 2 October. It also records the 2026 IMDG Code Supplement on 20 October and the French and Spanish editions of the 2026 IMDG Code (Amendment 43-26) on 22 and 9 October respectively. The English IMDG edition was published on 21 September.
Amendment 43-26 was adopted by the IMO Maritime Safety Committee at MSC 111 in May 2026. It updates dangerous-goods provisions covering, among other subjects, batteries and electric vehicles, explosives, radioactive material and chemicals. It may be applied voluntarily from 1 January 2027 and is expected to become mandatory on 1 January 2028.
- Shippers, packers, carriers and port operators should identify affected dangerous-goods entries and update classification, packaging, marks, labels, stowage, segregation and emergency-response procedures.
- Training providers and shipowners should align shore-side and seafarer training materials with the edition and amendment being applied.
- The revised CTU Code is scheduled for consideration by MSC 112 in December 2026; it remains a draft until approved.
Primary sources: IMO — Just Published register · IMO — MSC 111 summary · IMO — CCC 12 summary.
United States changes export-control treatment for certain uncrewed underwater vehicles
An interim final rule effective 19 October removes certain uncrewed underwater vehicles from U.S. Munitions List Category XX(a), shifting those items from ITAR control to the Export Administration Regulations unless they remain controlled elsewhere. The change does not mean that the equipment is uncontrolled.
- Manufacturers and exporters should reassess the classification of affected models, components, software and technical data.
- Update export-control matrices, licensing checks, end-user screening and destination controls before shipment or transfer of controlled technical information.
- Where classification is uncertain, obtain a formal determination rather than assuming that a product is outside export controls.
Primary source: Federal Register, 18 September 2026 — Department of State rule on USML Category XX(a), effective 19 October 2026.
Ministry of Trade updates the A-type and B-type international surveillance organisation lists
The Ministry of Trade’s published list was updated on 28 October under Communiqué 2026/30. The page identifies organisations holding A-type and B-type International Surveillance Organisation status.
Who is affected: importers, exporters and businesses commissioning inspection services that must be performed by an organisation holding the relevant status under the communiqué.
Practical action: check the current Ministry list and the applicable A/B status before appointing an organisation for a regulated foreign-trade inspection. General inspection experience or an ISO/IEC 17020 accreditation should not be assumed to substitute for a specific statutory status where one is required.
Primary source: T.C. Ministry of Trade — International Surveillance Organisations List, updated 28 October 2026.
What This Means for Your Business
Recommended actions
Organizations with cross-border supply chains, regulated products or capital projects should turn the October developments into a short, evidence-led action plan.
- Refresh the regulatory and standards register. Record the applicable edition, legal status, market, product family, responsible owner and transition date. Separate binding requirements from proposals and guidance.
- Protect the next 90 days. Assign accountable owners for the 2 December AI Act date, 30 December EUDR date, 31 December organic recognition milestone and 20 January machinery-safety application.
- Recheck technical files and test plans. Review machinery risk assessments, safety-related software, pressure-equipment standards, materials traceability, welding qualifications, NDT, pressure tests and supplier inspection records.
- Make digital-product incident response operational. Confirm CRA scope, product ownership, vulnerability escalation, 24/72-hour reporting capability and final-report responsibilities.
- Strengthen emissions and origin data. For CBAM, reconcile installation-level emissions data to production and energy records. For EUDR and organic products, verify commodity classification, supplier identity, geolocation, chain-of-custody and control-body status.
- Validate the competence and status of external bodies. Check the current accreditation scope, notification or statutory authorisation relevant to the exact inspection, test, verification or certification activity.
- Engage with draft requirements early. Consider technical comments on the PHMSA LNG proposal and FDA drug-delivery draft where they affect product design, safety evidence or testing programmes.
How Global Alliance Register Can Support You
Independent technical support across the product and asset lifecycle
Global Alliance Register provides technical consultancy, testing and analysis coordination, inspection, conformity-assessment, certification and market-access support for organizations managing regulated products, suppliers, projects and industrial assets.
- Regulatory and standards gap reviews: product classification, applicable standards, technical-file review, conformity routes and market-access planning.
- Inspection and supplier assurance: source inspection, vendor surveillance, expediting, fabrication monitoring, FAT/SAT, commissioning and asset-condition assessments.
- Technical testing and verification coordination: NDT, material verification, welding surveillance, pressure testing and laboratory testing appropriate to the product and applicable scheme.
- Supply-chain and sustainability evidence: supplier audits, traceability reviews, emissions-data readiness, CBAM evidence preparation and EUDR-related due-diligence support.
- Management-system and conformity support: gap assessments, audit preparation and certification or conformity-assessment coordination within the applicable scope and authorisation.
Where a regulation requires an accredited verifier, notified body or other statutory authorisation, the required scope and status should be confirmed before the activity is commissioned. GAR’s role is to help define the technical need, evidence and appropriate assessment route; the manufacturer and other economic operators retain their legal responsibilities.
Clarify your compliance and assurance requirements
Share your needs-assessment requirements with Global Alliance Register to clarify applicability, evidence gaps and the appropriate testing, inspection, certification or conformity-assessment route.
Request a Proposal30–90 Day Watchlist
Dates to place on the compliance calendar
Dates below are based on the legal and official information available on 1 November 2026. Confirm the latest text and national implementation details before acting.
EU AI Act
Article 50(2) compliance deadline for covered AI systems placed on the market before 2 August 2026; new Article 5 prohibited practices also begin to apply.
EUDR — large and medium operators
Application begins for large and medium operators and for micro/small operators already covered by the EU Timber Regulation.
Organic third-country equivalence
Current Article 48 recognition reaches its scheduled sunset for certain third countries unless the amending act is adopted and published in time.
IMDG Code Amendment 43-26
Voluntary early application may begin where the relevant Administration permits it. Mandatory application is expected from 1 January 2028.
Machinery Safety Regulation
The main provisions of Türkiye’s Machinery Safety Regulation (2023/1230/AB) and the corresponding EU Machinery Regulation apply.
FDA drug-delivery draft guidance
Deadline to submit comments on the draft guidance for essential drug-delivery performance characteristics for devices intended to deliver drugs and biological products.
IMO MSC 112
The revised CTU Code is scheduled to be submitted for approval. It remains a draft until the Committee takes the relevant decision.
PHMSA LNG proposed rule
The proposal indicates a 60-day comment period after Federal Register publication. Check the official notice for the final closing date.
Authoritative Sources
Primary references and official guidance
Source links below lead to the relevant regulator, standards-policy, accreditation, government or intergovernmental publication.
- European Commission — EN 18286:2026, 19 October 2026
- EUR-Lex — Regulation (EU) 2026/1744, Digital Omnibus on AI
- ENISA — CRA Single Reporting Platform FAQs, updated 15 October 2026
- European Commission — Proposal for a Regulation on European standardisation, COM(2026)780
- EUR-Lex — Commission Implementing Decision (EU) 2026/2211, pressure-equipment standards
- Resmî Gazete — Makine Emniyeti Yönetmeliği (2023/1230/AB), 16 October 2026
- TÜRKAK — ISO/IEC 17020:2026 transition policy
- Swedac — First Swedish CBAM verification body accredited, 13 October 2026
- Swedac — UKAS cooperation agreement, 27 October 2026
- Council of the EU — Special Committee on Agriculture, 26 October 2026
- EUR-Lex — Regulation (EU) 2018/848 on organic production and labelling
- PHMSA — Proposed amendments for LNG facilities, 28 October 2026
- FDA — Regulatory Considerations for Prescription Drug Use-Related Software, October 2026
- FDA — Draft drug-delivery performance guidance, October 2026
- IMO — Just Published register, including 2026 STCW and IMDG editions
- IMO — Maritime Safety Committee 111 summary
- IMO — Sub-Committee on Carriage of Cargoes and Containers, CCC 12
- U.S. Federal Register — Department of State rule on USML Category XX(a), effective 19 October 2026
- European Commission — EUDR application dates and implementation
- T.C. Ministry of Trade — International Surveillance Organisations List, 28 October 2026
Important notice: This bulletin is an information service for business and technical planning. It is not legal advice and does not replace review of the applicable legislation, harmonised standards, national implementation measures, product classification or competent-authority guidance. Applicability depends on the product, activity, destination market, economic-operator role and relevant transition provisions. Drafts and proposals may change before adoption.
